You can make a contribution to support
Simple
trACtors online, safely and
securely, using our PayPal account.
Click for a closer view
L-12 hydraulic loader
for Allis-Chalmers lawn and garden tractors
The all-hydraulic Allis-Chalmers L-12 loader is ideally suited for light commercial and farm use. It handles four cubic feet of loose material at a
time . . . lifts 300 pounds to a height of more than five feet . . . has 500 pounds of breakout force to give you a full bucket every time.
The loader main frame is attached to a sub-frame mounted on the tractor, making it easy to remove the loader when you want the tractor for another job.
Center mounted equipment can be used on the tractor without removing the loader.
Hydraulic reservoir is built into the frame for protection and maximum cooling of oil. Combination hydraulic pump and two-spool control valve is belt driven from the front PTO of tile tractor. Alignment problems are eliminated because there's no direct
coupling to PTO shaft.
Click for a closer view
SPECIFICATIONS
Breakout force
500 lbs.
Lifting capacity to full height
300 lbs.
Clearance at full height
63-1/2"
Maximum dumping angle at full height
45°
Clearance with bucket dumped 45°
49-1/2"
Reach with bucket dumped 45°
20"
Reach with bucket on the ground
35"
Digging depth below ground level
1-1/2"
Cycle time:
Raise
3-1/2 seconds
Dump
2-1/2 seconds
Lower
2 seconds
Bucket width
42"
Heaped capacity
4 cu. ft.
Bucket and lift control
hydraulic
Hydraulic system:
Pump capacity
1-1/2 GPM @ 2000 RPM
Relief valve setting
1500 PSI
Hydraulic cylinders (bore/stroke/ rod
diameter)
Bucket, double acting
1-3/4" x 9" x 3/4"
Lift, single acting
1-1/4" x 12" x 1-1/4"
Reservoir capacity
2-1/2 qts.
Oil filter
40 micron element
Shipping weight
353 lbs.
Allis-Chalmers reserves the right to make changes or add improvements to
these specifications without notice or obligation.
FROM THE TRACTOR PEOPLE WHO MAKE THE BIG ONES
ALLIS-CHALMERS
Source: Allis-Chalmers sales/spec sheet,
OPE-1016,
courtesy of Del Allen
