You can make a contribution to support
Simple
trACtors online, safely and
securely, using our PayPal account.
Click for a closer view
A-10 post hole digger
for Allis-Chalmers lawn and garden tractors
Dig holes up to 30 inches deep quickly and easily with the Allis-Chalmers A-10 post hole digger. Save time and effort setting fence posts, planting trees, putting up rural mail boxes and doing many other chores.
Auger is raised and lowered by a clutch-controlled belt drive from the tractor's front
PTO and drive shaft. The 2.5 GPM hydraulic pump is also driven off the tractor's front
PTO.
Augers come in 4 to 14 inch diameters. Serrated cutting edges are available for
9 through 14 inch sizes. Mast can be tilted forward or back and from side to side to keep
auger vertical when tractor is parked on a slope or uneven ground.
SPECIFICATIONS
Click for a closer view A-10 Post Hole Digger
Digging depth
30" (without extension)
Hole diameter
4" minimum, 14" maximum
Auger sizes
4", 6", 9", ]0", 12", 14"
Mechanical tilting adjustment
Forward and back
24° (12° forward, 12° hack)
Side to side
36° (18° right, 18° left)
Hydraulic system
Pump drive
Belt
Pump capacity
2.5 GPM
Pressure
750 PSI @ 3600 RPM
Relief valve selling
1500 PSi
Reservoir capacity
2 qts.
Oil filler
Screen
Overall height
75"
Ground clearance
4-1/2"
Weight (less auger)
446 lbs.
Allis-Chalmers reserves the right to make changes or add improvements to
these specifications without notice or obligation.
FROM THE TRACTOR PEOPLE WHO MAKE THE BIG ONES
ALLIS-CHALMERS
Source: Allis-Chalmers sales/spec sheet, OPE
1015,
courtesy of Del Allen
