Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.

Wendell Bragg

Sign in to follow this  
  • entry
    1
  • comments
    9
  • views
    1,250

Sickle bar update

wwbragg

1,416 views

Received the new hinge and bracket.  The bracket was AC yellow - - -can't have that so after about an hour media-blasting and a day or so waiting for paint to dry, here are the parts, ready to install.  But wait!  What's that I see on the cutter bar?  Is that another wobbled bolt hole?  And same thing on the matching hole on the lever assembly.  Man. if it isn't one thing it is something else.  the fun never ceases.  I took the bar and lever to the machine shop where they will drill the holes to a bigger size.  I figure all of these wobbles and peened surfaces contributed to the violent shaking, so when this thing is done, you won't even know it is running.

2017-09-21 20.48.07.jpg

lever assembly.JPG

cutter bar.JPG



9 Comments


Recommended Comments

gwiseman

Posted (edited)

Lots of moving parts so lots of possible wear areas. Keep us posted Wendell. 

I've got 1 of mine operating, just need to figure out how to make it available to you.  

 

 

Edited by gwiseman

Share this comment


Link to comment

I'll have to learn how to use the video feature on my camera, but will post something when it is done.  But the previous owner used some kind of funky cone washer on the hinge shaft.  He sure took a lot of short cuts (curse his hide).  Paint does not a restoration make. Does anybody have a Simplicity part no 101049 (item 48 in the picture below)?

part no 48.gif

Edited by wwbragg

Share this comment


Link to comment

They really take a beating and they have to be TIGHT.  Wobbled out bolt holes, and improper keys and washers leave too much slop and it will beat itself to death.  I wonder if the extra power of that HF 13 HP motor is contributing to the problem.  Once I get mine running, maybe I will just save it for the local parades.

Ooooh, look, daddy.  Just like yours only smaller."

Edited by wwbragg

Share this comment


Link to comment

Here are some pics of the original parts.  I thought I had posted them elsewhere but now I can't find them.  I guess that's the advantage of using a blog. 

I took the bar to the machine shop to have the holes drilled out.  I also took in these old parts and had them rebuilt.  See the difference?  I'll put them up on ebay but if I can't sell them, I will keep them for backup.

2017-09-10 23.50.40.jpg

2017-09-10 23.53.19.jpg

2017-09-16 18.16.47.jpg

2017-09-16 18.17.16.jpg

2017-09-24 16.57.29.jpg

2017-09-24 16.58.08.jpg

2017-09-24 16.57.59.jpg

Edited by wwbragg

Share this comment


Link to comment

I'm not saying "THE" previous owner, but certainly "A" previous owner took a lot of shortcuts.  Besides the peened over parts and wobbled out bolt holes here are some shots of other things I found.  In both pictures, the item on the left is incorrect and the one on the right is, well, right.  In the picture of the sickle head, not only were the bolts too long, but they were the wrong thread.  So even when I re-tapped the threads correctly, they stripped out completely when I tried to install the correct bolt.  

If you look at the right side of the sickle head, you can see that there is not much material left.  So I bought a reproduction part (Thank you rokon2813) and drilled the three bolt holes out to 3/8; drilled the blade bolt holes to 21/64 and tapped them to 3/8-24.  

She is almost back together.  I'll borrow my grand daughter's helmet cam and take a video (if it works).

SB MIssing incorrect 01.jpg

2017-10-31 00.59.21.jpg

Share this comment


Link to comment
Dallas Cizek

Posted

i have a sickle mower for the large frame tractor but need the lift cable and pulley for side of tractor can i get pic and size of parts so can make one    

Share this comment


Link to comment
wwbragg

Posted (edited)

I'm not sure, but I think your sickle bar is part no 1690030.  See if this parts list looks familiar:  http://www.partstree.com/parts/simplicity/accessories/1690030-simplicity-46-sickle-bar/sickle-group/

Mine is the smaller unit so I have no lift pulley to photograph.  Was thinking about adapting it for cable lift but I have had enough problems just getting it this far.  

Unless you are going for restoration competition, you could probably come up with a pulley system with parts from Tractor Supply.

 

Edited by wwbragg

Share this comment


Link to comment
Guest
You are commenting as a guest. If you have an account, please sign in.
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoticons maximum are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×