Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Deleted Simplicity 3410s
  • Make Simplicity
  • Series 3300-3400 Series
  • Model 3410S
  • Year Tractor Was Made 1973
  • Manufacturer (MFR) Number --
  • Tractor Serial Number 990756
  • Engine Manufacturer Briggs & Stratton
  • Engine Model 243431
  • Engine Serial Number 0627-02
  • Date Purchased 06/29/1995
  • Purchase Price $$ 300.00
  • Condition at Time of Purchase When I bought the tractor it was sitting for eight years. It was in good shape, for a 73 Landlord. It had two flat tires, a worn seat that told me it had a lot of hours. So I took the carburator off and rebuilt it. Changed the oil,sparkplug and I changed the oil in the Bevel gear box, trasmition oil,and greased the whole tractor. I checked everything over before I cranked it over. She started after a few cranks,I had to adjust the carburator, and she was running good and about ten minutes of running she started blowing white smoke. I checked the oil and she was low, about half a quart low. Everything on the tractor was fine, except the bevel gear box was a little bit noisy. Transmition was perfect. I ran the tractor for five years like it was. After so many hours the engine was blowing a quart every hour,but still ran, I tried blowing the engine up,but she never gave up on me. After so much work,plowing snow,rottertelling 2 acers of grass,pulling 17cu.ft.dump cart of dirt, cemment,block,stone,all kinds of junk. So i decided to restore the tractor because it was wourth it.I had a Craftsman tractor before and that was junk, I had a Toro tractor,and that blew up.
  • Condition Now The tractor is 80% done.I bought a brand new 16HP cast iron briggs, 12v ingnition system,its got a 12V Condensor and a MSD BLASTER 2 coil. Its got all all new wiring, front head lights. The bevel gear box was rebuilt, also the trasmition was rebuilt. The tractor runs very good, its got alot of power. I bought a bucket from Johnny Products that works great. After I rebuilt the engine the tractor still wasn't done and my neighbor, with his 17-HP Craftsman 2000 Model wanted to pull me. I didn't think twice about it, it got so intense that our mothers were watching. Needless to say, first pass,in 2nd gear,I pulled him 5-6 feet. He still wouldn't give up, so he had his little nephew sit with him to have more weight. On our second run, I threw it in 3rd gear and matted it! My front tires started to drift so I cut down the throttle and pulled away until he yelled "STOP!". Now he believes that the Simplicity Landlord proved him wrong. Everytime I see him now, I have fun confronting him about pulling. I like the tractor alot, I am looking for 7016 year 1975 sticker detail for the hood. Please contact me if you can assist me with this.
  • URL Link http/mva-003f-jpg.


There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

IP.Board Collections by DevFuse