Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Pully size for Rototiller???


Karl_Brandt

Recommended Posts

John, I bought a used tiller and it came with the larger drive pulley and the drive belt. The pulley is 10" and the drive belt is marked 155004 O&HR Special Ply Super. I have not had it on the tractor because i can't get the original pulley off. The belt looks like it should work but I can't verify that. If you need any other info on the tiller let me know. Tim
Link to comment
Share on other sites

Karl_Brandt
Could someone please tell me the pully size to use to slow
my tractor down,so I dont have to ride the clutch when I am tilling. My Hi-Lo kit has worn out the gear for low
range.
Also does anybody else have problems with the Hi-Lo kits coming loose regularly(allen screws coming loose) even Lock Tite doesn't seem to help.
Link to comment
Share on other sites

John, I have in stock if you're interested a 9" pulley with hub for your trans. It's off a 6spd. trans. Belt# for that pulley is I believe 1607967 52.2" I do not have belt. That will slow your trac down to the same ground speed as a 6 spd in low range. Hope that helps Regards, Dave C.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...