Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
johnmonkey

AC big ten PTO spring

Recommended Posts

johnmonkey
I was working on a big ten today and placed a new pto belt on it (from bgb to pto). (it did not have a belt on it for a long time). The belt went on ok and I hooked up the mower deck and belt(pto to mower deck) but the belt kept coming off. I looked in my manual for my 725 and I saw a return spring that was located on the PTO that went back towards the brake band. There was not a return spring on the PTO of the big ten. Question; is there a belt that attaches on the pto and if there is,does anyone have the part number?? thanks for your help John H

Share this post


Link to post
Share on other sites
gregc
John, I assume that you meant a spring instead of a belt in your question. Yes there is a spring, and a spring tensioning rod and handle. PTO picks below, you need parts 28, 29, 30 and 31. You can cross reference the part nos. here: http://www.simpletractors.com/parts/X-ref/page_32.htm

Share this post


Link to post
Share on other sites
Dutch
quote:
Originally posted by johnmonkey
Does anyone know if they are still available??
Cross the numbers over to Simplicity and check them out with Jack's online database. Or, just call Bill at Sandy Lake.

Share this post


Link to post
Share on other sites
johnmonkey
Thank god for Sandy Lake Implement!!!! I ordered the parts (except the part 29 had to be back ordered) Everything else was there and I hope to have the BIG TEN back in operation soon. Thanks for all your help!!! This is why I like this site.... you get lots of help when you need it. Take care John H

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Mine19821
    • 720nut
    • dhoadley
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×