Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
simtrac

Sleeve Hitch

Recommended Posts

simtrac
Hi All, I'm building a sleeve hitch for one of my tractors,I have a picture,and a good idea,but was wandering if anyone would want to share the actual demensions of the hitch? Also,what the heck is the 2 bolts at the sleeve for? Call me dumb,but having never actually seeing one, its got me stumped. I'm guessing 6 1/4 inchesx 9 1/2 inches. Close? Thanks in advance "Simtrac" woody@kwcom.net?

Share this post


Link to post
Share on other sites
dirtsaver
Hi Woody Dutch I think put up a set of plans a while back for the lower hitch parts. Try a search in the posts for that. As for the bolts, they are to adjust your plow angle and keep tension on your Brinley- hitch type implements. Larry

Share this post


Link to post
Share on other sites
Charlieson
Here is the link to the drawing on the sleeve hitch. What two bolts are you talking about? I have this hitch and I dont see two bolts. Can you post the picture you are talking about. ddh http://www.simpletractors.com/parts/drawings.htm

Share this post


Link to post
Share on other sites
G.Kiebler
on a brinly plow there is a ,lets say "c" channel with (3) 5/8 holes top and bottom.The sleeve hitch mounts on the inside of the channel,the hitch has (2) bolts which are tightened into the "c" channel plate which help to fine tune plow angle and to stabiize the impliment from swaying.

Share this post


Link to post
Share on other sites
dirtsaver
Neil.....thanks for posting the pic and plans. After I made my post I tried to find the link but my search came up empty. Can you give the link so I can mark it? Larry

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Paul M.Murphy
    • TimJr
    • Bear
    • s_stephen
    • MRR
    • PhanDad
    • simplewrench
    • monge
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×