Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors


Carry All Box?

Recommended Posts

I need to make a carry all box to attach to either a sleeve hitch or the simplicity rear lift system. I'd like it to be simmilar to the factory carry all boxes for the 725's. Has anyone ever made a carry all box? I don't care if it raises and lowers by using the lift, I just figure it would attach to that in some way. Thanks. -Chris

Share this post

Link to post
Share on other sites
That sure is a fine box and in good shape too. I just had to keep looking to see where I saw it. It was in one of UCD's Ebay postings that I saw. It's still on Ebay at this time and still for a reasonable price I think. [url]http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2324272348[/url]

Share this post

Link to post
Share on other sites
Maybe someone like Johnny Products should look into reproducing those. Can't afford $500 for a Johnny Bucket, but $100-$200 for one of those I could do. Brent

Share this post

Link to post
Share on other sites
I have a NOS Carry All box that's never even been assembled, I'll get some pics and post them later....... Here's the box with the brackets still wired in place for shipping.

There are four pins along the bottom of the tail gate and a tab on each top corner to hold it in place.

Here's a better look at the brackets.

Share this post

Link to post
Share on other sites
The carry all looks to be a simple project to build. Maybe some one who has one could post the basic dimensions of the frame parts and the top pivot assembly for those of us that would like to build one.

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.

  • Who's Online (See full list)

    • reerg1
    • deebig
    • TTDE419
    • PhanDad
    • SmilinSam
    • Ian C
    • a_sannine
    • rokon2813
  • Today's Birthdays

    1. Ole Settler
      Ole Settler
      (71 years old)
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts