Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

912H Steering

Recommended Posts

One way is take the front spindles off and clean,take any rust off the spindle and put back together and grease very good.;) My AC 912H is also hard to steer.:D Karl

Share this post

Link to post
Share on other sites
Download this manual from the simplicity site: TP_500_973_01_SV_SMA It is the service manual for the tractor, my 712H's steering set up years ago and I removed the steering gear assy. and added a grease fitting to lube the upper bushing for the steering shaft in the housing. Keep that fitting ,the fitting for the cross shaft and the kingpins greased and it should steer real easy. Don

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • NandoG
    • tamurmueen
    • RickS
    • victorsnc
    • Chris727
  • Today's Birthdays

    1. Trevor Hostetter
      Trevor Hostetter
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts