Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Mower belt ???????


MPH

Recommended Posts

Just in case the grass grows this summer figured I best ckeck out the deck before I go back to work tonight. Found a Simplicity belt # on the belt which is 108209, best I can makeout. Does that sound like the rt # for a 42 inch deck that might have come with the 112 or maybe the parts of the B10 or maybe some other tractor of that vintage. There are no sign of tags or #'s on the deck..Thanks...MPH
Link to comment
Share on other sites

Marty There is no Belt # 108209 listed in the belt book B-112 MFG# 990544 42" Rotary Mower Cross Drive Belt# 108248 Length 48.1 Type HA Arbor Drive Belt# 1719819 Length 82.1 Type HA Blade# 1656144 Qty 3 MFG# 2025033 42" Rotary Mower Cross Drive Belt# 108248 Length 48.1 Type HA Arbor Drive Belt# 1719819 Length 82.1 Type HA Blade# 1656144 Qty 3 MFG# 2025080 42" Rotary Mower Cross Drive Belt# 174911 Length 44.1 Type HA Arbor Drive Belt# 1719819 Length 82.1 Type HA Blade# 1656144 Qty 3 B-10 MFG# 990285 42" Rotary Mower Cross Drive Belt# 174911 Length 44.1 Type HA Arbor Drive Belt# 1719819 Length 82.1 Type HA Blade# 1656144 Qty 3
Link to comment
Share on other sites

Hmmmm, Thanks Maynard. I could see the # good enough to tell it wasn't close to 1719819. Outside measurnebt I got about 84 inches. My college engineer is figuring out mid length.. Sandy Lake, Oh help. Nick figured 82,4...MPH
Link to comment
Share on other sites

quote:
Originally posted by MPH
There are no sign of tags or #'s on the deck..Thanks...MPH
Does any body know if there are supposed to be numbers or tags on the deck? Steve
Link to comment
Share on other sites

Steve, I believe they came with foil stickers. My 42 and rusted up 48 inch both had patent # stickers still on and thre 48 in had a 'clean' spot in the paint where one fell off not too many years ago..MPH
Link to comment
Share on other sites

Marty go here, http://www.simpletractors.com/parts/belts/belts_(pg18).htm You'll see what you have and what Maynard posted is correct size wise. Looks like number was superceded at some point in time.
Link to comment
Share on other sites

I dunno Bob, this mac told me page cannot be found.. Thanks for tryin... Gotta get packed up and head back too work..MPH
Link to comment
Share on other sites

quote:
Originally posted by MPH
I dunno Bob, this mac told me page cannot be found.. Thanks for tryin... Gotta get packed up and head back too work..MPH
I checked, it doesn't link you. Anyway under parts in opening part, click on parts and then belts, go to page 18
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...