Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Drigon

Engine type for 4111 searched

Recommended Posts

Drigon
I have 4111 bought however the engine am missing. I would like to buy a new engine and do not point not the exact designation engine.I point only it a 11HP briggs was. Please number of the engine says the types to me. Thanks ....:)

Share this post


Link to post
Share on other sites
bigcountry
I have a 4211 and here's my numbers for the engine. Briggs & Stratton 11hp Single Cylinder Model: 253707 Type: 0167-01 Code: 85071510 Don't know if they still make that type, but you can check and see. I think that probably a Briggs and Stratton 11hp Power Built Series engine is the closest you'll get to what was on there. There's more details on that engine at www.briggsandstratton.com, and click on Briggs and Stratton Engines, and click on lawnmower engines, and then click riding lawnmower engines, and then Power Built Series is at the top of the page. It gives details for the 10hp, 11hp, and 12.5hp versions.

Share this post


Link to post
Share on other sites
BLT
For a replacemnt engine new, this is about as close as you can get. Go here. http://www.smallenginewarehouse.com Under Briggs and Stratton vertical engines look for 28R707

Share this post


Link to post
Share on other sites
mowerman1193
I copied and pasted the info from the simple tractors site below.... ENGINE INFORMATION - 1981 Simplicity Model Year Manufacturer Number Tractor Description Engine Model Engine Type 4000 Series 1979 1690458 4211 - 11 HP 252707 0130-01 1979 1690456 4208 - 8 HP 191707 5646-01 1978 1690343 4111 - 11 HP 252707 0130-01 1978 1690259 4108 - 8 HP 191702 5626-01 1977 1690262 4108 - 8 HP 191707 5149-01 1977 1690260 4108 - 8 HP 191702 5626-01 1976 1690173 4008 - 8 HP 190702 0898-01 1976 1690174 4108 - 8 HP 191707 5149-01 1976 1690176 4208 - 8 HP 191707 5148-01 Here is the link to that page.... [url]http://www.simpletractors.com/parts/engine/4000_series.htm[/url] Hope this helps..

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • B-16_IC
    • Tcorm
    • deebig
    • Bird76Mojo
    • rbstuartjr
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×