Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

NEED HELP--Big Ten Sickle Bar Mower

Recommended Posts

?Would like to know the belt size that comes off your gearbox to the pulleys that drive the blade on the sickle bar mowers:(! ?What keeps the blade in vertical position when not in use? ?Where can you get blades made for the Sickle Bar Mower that fit the Big Ten and the 410?? Casting number: 101029 for Big Ten Serial number for 410 is 54884 (410 keeps breaking blade at pitman, and it is not hung up!!) Thanks for your help, Chris

Share this post

Link to post
Share on other sites
What engine speed are you running when you use your sickle bar mower? The book calls for engine speed that gives "a fast walking pace when in high gear", basically fairly slow engine speed. I am guessing that you don't have the cable lift sickle bar mower, in which case you need a transport chain to keep it raised for travel.

Share this post

Link to post
Share on other sites
BIG-10 Drive Belt# 154273 Length 42.3" Type HL Units with Low Speed Pulley use Belt# 174486 Length 48.9 Type HB Generator Belt# 1607323 Length 37.5" Type 3/8 P.T.O. Belt# 164146 Length 34.1" Type HA Power Lift Belt# 157230 Length 22" Type 3/8 32" Rotary Mower Cross Drive 108248 Length 48.1" Type HA Arbor Drive Belt# Length 156120 63.1.................HA Blade# 108297 Qty 3 42" Rotary Mower Cross Drive Belt# 174911 Length Length 44.1HA Arbor Drive Belt# 1719819 Length 82.1" Type HA Blade# 1656144 Qty 3 36" Snowthrower Drive Belt# 106689 Length 55.5" Type HA Drive Belt# 1721533 Length 56.1" Type HA 32" Tiller Drive Belt# 154273 Length Trans. Drive Belt# 152017 Length 42.3" Type HL Drive Belt# 105122 Length 55.9" Type HB Vacuum Collector Drive Belt# 1703836 Length 91.1" Type HA 46" Sickle Bar Drive Belt# 156120 Length 63.1" Type HA

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • s_stephen
    • RenegadeJ
    • Tom45
    • Bill725
    • littlefan
    • colincox1
  • Today's Birthdays

    1. 9934059
      (71 years old)
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts