Kolher Command HELP

[Kokomo]

I have an AGCO ALLIS 918H. The engine is an 18HP kohler Command, model CH18. I think the head gasket on one side is bad, as the compression on one side is 110 and 170 on the other side. I hope that is all that is wrong with it. I am in the process of removing the head and do not have a service manual and can not find one on the Internet. Does anyone have the torque specifications for the head, intake and exhaust bolts for this engine?

[Dutch]

http://www.jackssmallengines.com/serk.cfm

[UCD]

Kohler Downloadable manuals pdf format Owners Manuals [url]http://www.kohlerengines.com/onlinecatalog/manuals.jsp[/url] Service manuals [url]http://www.kohlerengines.com/service_manuals.html[/url]

[Kokomo]

CH18 Engine manual is not located at this web pages listed above and I was hoping to put the engine back togather tomorrow.

[UCD]

The torque specs should be the same in the ch series

[Kokomo]

The Ch11 listed at that web page is a single cylinder and mine is twin cylinder. Do you still think it would be the same?

[UCD]

You can all so clic on online store at the above sites and order manuals CH twins are included

[StanD]

Torque to 15 ftlbs, then to 30 ftlbs final torque. Right out of Kohler CH18 Shop Manual.

[BLT]

Download the CV 20 manual, torques should be the same for what you are looking for.