Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

pullcrazy

Help, please help!

Recommended Posts

pullcrazy
I could really use a hand, I need to trace some wiring problems on my 6216 (mfg#1690930) and could really use a wiring schematic for it. My computer skills are limited so I am apprehensive about downloading manuals. Does anyone out there have a copy of this that they could E-mail me? Any help with this would be greatly appreciaed! Thank you in advance! Jeff

Share this post


Link to post
Share on other sites
Rahbas
Here's the link to the repair manual for the 6216. It's large if your on a dial up connection. It's about 3.1 meg. It has a nice wiring diagram and is a great manual to have. [url]http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_500_974_00_LT_S.pdf[/url]

Share this post


Link to post
Share on other sites
arnoldir
Jeff, As we discussed, the lights are the only thing on the black wire (AC) circuit on the alternator. The PTO and Neutral indicators only come on when the key is turned to the start position, this way if it does not crank you can see which safety switch is not closed. Good luck If your replacment motor does not have that circuit

Share this post


Link to post
Share on other sites
pullcrazy
Thanks, Thanks,a million thanks! All of you have been very helpful . I was able to print off the schematic from Maynard. I am going to study it and hopefully I will be able to get it all correct. I will definately keep you all posted soon. By the way, I can't beleive, how fast you all respond...access to this site and group of people is absolutely PRICELESS!! Thanks, again Jeff

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Who's Online (See full list)

    • mikeman
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×