Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Bunky

Hydro Lift problems

Recommended Posts

Bunky
I have a 2010 w/hydro lift when I got it it worked ok but it wouldn't stay up very long... Then it started lifting slower and having to rev it up.. Now it will barely lift... I have: checked the fluid checked the belt Is there a way i can check the pump or cylinder to tell which is bad????

Share this post


Link to post
Share on other sites
Bunky
Is the a breakdown of the Hydraulic pump I think maybe the pressure relief is sticking... The chrome is still on the cylinder except for one little spot but it looks smooth...

Share this post


Link to post
Share on other sites
RayS
Theres a break down in any of the old parts manuals that you can download from Simplicity Techical Pub. Any respectiable auto parts store such as Napa or a bearing distributor would have the O rings. Thedaddycat did a tread on this a while back. Ray

Share this post


Link to post
Share on other sites
mowerman1193
Sounds to me like you need to take it off and bring it over:),I have a manual lift that works just fine:I, BTW,I will dispose that hydro lift for you!:D

Share this post


Link to post
Share on other sites
Bunky
I tried the lift again today it will lift the tiller but not if it's in the ground or has any weight on it... How do I test the pump??? And can I take the valve off with the unit in the tractor???????

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • dayardguy
    • MARK (LI)
    • goatfarmer
    • gwiseman
    • fisherman1122
    • Rkelly86
  • Today's Birthdays

    1. 9934059
      9934059
      (71 years old)
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×