Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  


Recommended Posts

Got an AC310 shuttle today. Of course no manual with it. Got the ser. plate but no mfr. ID#. Could someone let me know what the ID# may be? Ser.# is 04106844. Thanks

Share this post

Link to post
Share on other sites
The manufacturer number is 1600044 for a 310 or 1600045 for a 310D Quick model specifications can be found at http://www.simpletractors.com/models/ac_300_series.htm You can download the manuals. Service manual: TP_500_3483_00_LT_A.pdf Parts manual: TP_400_1505_00_LT_A.pdf go to http://www.simplicitytechpubs.com/v_techpubsearch.php#start

Share this post

Link to post
Share on other sites
At the above site type in the 4 digit tp# XXXX in this case it would be 3483 or 1505 to get file then click on view PDF. TP = Tech Publication. 100, 200, 300, 400, 500, 600, 700, 800, 900, = Classifcation code. You can type in these numbers then read tought the list to find the manuals you want. XXXX = Tech Publication Number.

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • s_stephen
    • PhanDad
    • Chris727
    • gwiseman
    • Mine19821
    • CDR
    • a_sannine
    • bowhunt4life
    • 720nut
  • Today's Birthdays

    1. Ed Ucation
      Ed Ucation
      (70 years old)
    2. Nick Freatman
      Nick Freatman
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts