Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
wantedinct

2210 deck

Recommended Posts

wantedinct
Hi all, i have a Landlord 2210, on the front of the deck, there are four square holes i was wondering what they were for,are they for some type of flap to hang in front of the deck? Thanks, Eric

Share this post


Link to post
Share on other sites
johnmonkey
There are a few different things that can attach to the deck. Here are the few that I know of and are for the discharge area; 1. rock guard (a flat piece of steel that covers the outlet). 2. vacuum shute (used with a leaf vac attachment) 3. grass deflector. (sheet metal that flips up and down and is spring loaded) I hope this helps. JH ps are these the ones to which you were refering?

Share this post


Link to post
Share on other sites
Kent
Are you talking about the four holes that are spread equal distance across the very front edge, about 1/2" up from the bottom of the deck? If so, there were two things that I've seen mounted there. One is a reinforcing bar, similar to the rock guard. Just a piece of 1/4" steel, about 1" wide that runs the width of the deck. The other is a baffle used with the leaf mulching ket that keeps the leaves from blowing out from under the front of the deck...

Share this post


Link to post
Share on other sites
Kent
John, I don't have a picture of one. Others have called them "anti-blowout" kits or something like that. It essentially extends the front of the deck down closer to the ground.

Share this post


Link to post
Share on other sites
UCD
This is a typical mulch kit Available for certain size decks 34" 1692470 38" 1692471 & 1692883 44" 1692472 & 1692884 50" 1692473 & 1692885 & 1692091 and some older decks 990173, 990264, 990450

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • RayS
  • Today's Birthdays

    1. Ole Settler
      Ole Settler
      (71 years old)
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×