Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

a job simplicity couldnt do...

Recommended Posts

Thought I found a job that Simplicity couldn't handle. There is a pile of topsoil in the neighbors back yard that is mine for the taking. Its too hard to shovel so I thought I would take the Landlord with the grader blade over and scrape it loose. Turned out to be too hard, too tall and too steep for that so Simplicity couldnt do it. I went and got my rototiller (front tine walk behind) and proceeded to chip and eat away at it with that. Lots of bouncing and bucking from the tiller but its doing the job. In about 20 minutes I had half the pile knocked down so we could shovel it. By the way the tiller is an old 5 hp Simplicity

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts