Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
simplicity707

need help with B-208

Recommended Posts

simplicity707
hi, i did end up getting the Allis-Chalmers B-208 out of the weeds this Sunday. when i got to looking at it, it's ALMOST complete. the said he was so happy that i took it out of his yard. he said if i didn't take it soon, he was going to scrap it. he said that i saved it's life! he even delivered it for me. anyway, i started working on it, but i need your help. i need two things, 1: front grill, and 2: the double pulley shaft the runs the pto and drives the tractor. i need one for a 8 horse engine. if anybody knows where i could get one it would be greatly appreciated. opps, forgot one question, does anybody know the belt sizes? i need belt sizes for inside the mowing deck 36", the one from the engine to the deck, and the other two that drive it. any info would be great. thanx, to greg for specs on the b-208. thanx again.

Share this post


Link to post
Share on other sites
gregc
Glad to hear that you got the B208.8D You can't beat the price or the service.:D Drive belt, engine to center shaft: #1601405, 40" HA. Drive belt, center shaft to transmission: #1601672, 61" HA. 36" Mower PTO belt: #1713515, 78" HA. 36" Mower Arbor Drive belt: #1713549, 70" HA. Top pulley for engine crankshaft: #1601410, 1" bore, 5.5" OD. Bottom pulley: #156111, 1" bore, 4.5" OD. Check this out for the pulleys: http://www.phoenix-mfg.com/default.htm You can probably get them for half the cost, or less, than from a Simplicity dealer or from Jacks.

Share this post


Link to post
Share on other sites
powermax_paul
Dave, If you need any help with the double idler pulley, let me know. With bad bearings in mine, I made up my own with idler sheaves and drawer parts from the hardware store.

Share this post


Link to post
Share on other sites
simplicity707
thanx greg for all the belt sizes. they help me out. theres one more thing that i REALLY need, the front grill. does anybody have one they'd like to sell?? thanx

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • NickC.
    • jimmers
    • PhanDad
    • TomSchmit
    • AC710
    • Paul M.Murphy
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
  • Adverts

×