Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

nahrwoldt

7119 rebuild

Recommended Posts

nahrwoldt
Well, I've started my summer project. It includes replacing a KT19 series I with a just found probably last in the country brand new (been in warehouse for awhile) KT19 Series II. Also adding a power steering kit, rear lift, hour meter and thanks Kent a horn. I will post pictures as the disassembly begins. Any suggestion, I do appreciate. Thanks, Tim

Share this post


Link to post
Share on other sites
MikeES
Tim, you will probably need to cut a small piece from the right side frame for the oil filter. This is easily done with sabre saw. Make sure the bottom drain plug is free on the oil pan of the new engine (sometimes these are locktited in). The side drain makes a real mess.

Share this post


Link to post
Share on other sites
nahrwoldt
The factory kit contains all equipment (hydraulic hoses,pistion,new steering wheel, new dash board and new choke wire) that you will need to upgrade your soveriegn. But you have to already have a hydraulic lift installed in your tractor. Mike thatnks for the advise!!

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×