Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Shuttle to Hydro conversion


RobertW

Recommended Posts

Have 3410S and I'm wondering what parts are needed to change over to later hydro ? Thanks for any input.
Link to comment
Share on other sites

Robert, You might want to check out these conversions on the SimpletrACtors site. This conversion has been done already by Kent and SmilinSam. [url]http://www.simpletractors.com/do_it/variable_to_hydro.htm[/url] [url]http://www.simpletractors.com/do_it/variable_to_hydro2.htm[/url]
Link to comment
Share on other sites

Its alot simpler than what Kent and I went through if you are doing a 3400 series Gear to a 3400 series Hydro. If you swap a vickers into it , its a pure bolt up ordeal, no cutting or welding. If you drop a Sundstrand into it you will have to get the torch and welder out. Another thing to consider is that a 10 HP engine will be way underpowered to run the hydro and the deck in heavier grass.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...