Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
B-1 Allis Chalmers

hood hinge for b-1

Recommended Posts

B-1 Allis Chalmers
does someone know what the hood hinges look like so i can make some

Share this post


Link to post
Share on other sites
thedaddycat
Yes....

Share this post


Link to post
Share on other sites
thedaddycat
....and if you say the magic word, I'll post these pics.... LOL Welcome to the club and Happy Tractoring!!

Share this post


Link to post
Share on other sites
MPH
Not for positive the B-1 is the same as the 725 tin wise but just happen to have that part of the 725 all exposed. about 3/16 x 1 1/4 in strap iron, offset the thickness of the iron, 4 inches center to center on the holes. Hope this helps you.. OH! found the home for the two rubber stops I posted in the pic the other day, had a flashback..MPH

Share this post


Link to post
Share on other sites
MDB
Here is a set that I had made up at a local machine shop,

I had them put the correct bend in it and drill the holes then I welded the bolt in the smaller of the two holes, that is where it pivots off of the grill frame. [img]/club2/attach/MDB/B1-8.jpg[/img] The B1s also have a hood brace that goes between the two hinges the one on mine was missing so I was able to get some measurments off of another B1 and make a hood brace for mine.

Here is the finished product, I hope this helps you out.:)

Share this post


Link to post
Share on other sites
Kent
Wow, I just hope no one ever asks some "Dr Ruth" type of questions -- I'd be afraid of all the pictures and advice we'd get... :D Great job of helping out, guys!

Share this post


Link to post
Share on other sites
B-1 Allis Chalmers
thanks i think that will work i have that braceyou were talkin about i just have to make the

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×