thedaddycat Posted August 25, 2003 Posted August 25, 2003 I'm helping MPH get some spares to keep the Arctic Fleet up and running...... Marty, here are the pivot lever, side plates, idler and the link from pivot to idler arm. Let me know what youi want.......
MPH Posted August 25, 2003 Posted August 25, 2003 Kirk, think the idler pulley and arm plus the link rod would make me a world of difference. If I recall corectly, the idler pivots on a stud bolt in the plate, if yours is still round I'll take that too as I'm pretty sure mine is not, not sure if is just a reg bolt or not.. Thanks a bunch...MPH The arctic fleet, I like that!!!!
thedaddycat Posted August 25, 2003 Author Posted August 25, 2003 The idler pivot post is not just a bolt, it is a shaft with a groove machined in to hold the retaining clip. It is also welded onto the right side plate. So right plate w/ idler assy and little offset linkage. Did you still want the other bracket, pivot lever or not? I'll get it boxed up and on it's way.... OK, I took another look at this one and it's not like the 3310 V... It has an Allen head screw of some sort to hold the arm on. The base still seems like it's welded to the side plate though... It looks like about 12 pounds, just kick the $20 shipping to the club and PM me your mailing address.....
Recommended Posts