SmilinSam Posted August 30, 2003 Posted August 30, 2003 Took a moment today to do a little modifying to my right lift lever assemble I made from the pattern of a original. [img]http://a2.cpimg.com/image/AC/2E/22936492-c26c-028001E0-.jpg[/img] I took the bracket that bolts to the lift arm and cut it down to expose the lift rod hole with some clearance. Then drilled a new hole farther down on the brackets for the second bolt to hold it on. By doing this I can use my front implements with either the right lift lever of the hydro-lift. Without these mods you would have to take the lever assembly off if you wanted to use the tractor lift to work the front attachment.
MPH Posted August 31, 2003 Posted August 31, 2003 this rt and left lift lever is sounding more attractive all the time, had to tie up the grader blade today so I could pull my detacher with the 112. Maybe I just need more tractors running..MPH
Recommended Posts