Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

My easy weights - revisited


Dadsy98

Recommended Posts

Back in January I posted my home made brackets for wheel weights. Here they are again: http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=11870&SearchTerms=weight http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=11945&SearchTerms=weight http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=11985&SearchTerms=weight Today I mounted a set with two 25lbs weights each on the 2110. I'm doing some grading and that old FDT is the berrys for Nike assisted down pressure.8D Steve
Link to comment
Share on other sites

Steve, You show one bracket made with angle and one bracket made with flat bar stock. How do you use the two different brackets? DaleC
Link to comment
Share on other sites

Roneil, Til you've graded with a footdagger, can't see how one could appreiate all the tool can do. Only thing better would be one made into a grader with down presure left or rt and hydr angle change..MPH
Link to comment
Share on other sites

Dale, The one made of flat stock is for the left rear wheel. The bracket made with angle stock is for the right rear wheel. the angle stock provides clearance for the differential stub. The EZweight system uses just flat stock. You need to use a few handfulls of washers to do the right side. That seemed tacky to me, so I made these brackets. Steve
Link to comment
Share on other sites

MPH So Right, The amount of control I have grading with my 3012 is amaing. If your legs are out of shape you sure will know it after a few hours though.:)
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...