Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Guest

1971 Simplicity 535

Recommended Posts

Guest
I just bought a PRIMO 535. Original VERY good paint,decals....runs like a new one. I paid $250 for this jewel.........Good deal? Any one have any implements or accessories to go with it?Thanks. P.S. The link is to my Garden Tiller Club on Yahoo..Check it out if you're interested![A href='http://clubs.yahoo.com/clubs/gardentillers']http://clubs.yahoo.com/clubs/gardentillers[/a]

Share this post


Link to post
Share on other sites
Guest
Yes Tim it is a Bolens.I'm really a Sears collector, but I do wish Sears made a rear PTO like the Bolens! I have not joined your Bolens club.....yet....I say yet because I'm looking at a Bolens walk- behind tractor to buy.It's kinda pricey($350).....I think it's about early 70's vintage...comes with plow,cultivator,disc, and sickle bar mower.Do you think that's too high?Walkbehinds are rare around here..(North Alabama)...so I'm inclined to buy it anyway. Let me know what you think. Thanks Jason

Share this post


Link to post
Share on other sites
tej
Jason, I am a Allis-Chalmers collector and know nothing about prices of 2 wheel Bolens tractors or any other 2 wheelers as far as that goes. The forum on the Bolens Tractors Club would be the best place to ask that question. Check out the link below. Tim [A href='http://clubs.yahoo.com/clubs/bolenstractorsclub']http://clubs.yahoo.com/clubs/bolenstractorsclub[/a]

Share this post


Link to post
Share on other sites
Tragu
Hi sounds like you have got a great deal. I own a 525 in very good condition it has a 27 inch blower on it and after i found the hitch thru this great club I replaced the belt and I have a machine that blows the hell out of the snow. I live in CT. so we dont see that much snow but what we see can be very wet and the blower just eats it up. Enjoy! Doug

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • glyndes
    • Bill725
    • s_stephen
    • JPD
    • GregB
    • OntBoy
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×