Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
DoubleT

Transmission problems on a Allis 710

Recommended Posts

DoubleT
I had the trans stick in thrid gear. I could move the gear shifrt into 1,2,or reverse. I could shift it into third but it felt like nothing was moving. Much like the shift fork was broke. I removed the trans and split it in half. I didn't find anything out of the ordinary. No broken shift forks or broken gears. Is there something else I should be looking for? Any help on this subject would be great. Thanks

Share this post


Link to post
Share on other sites
dlcentral
When these trans' act up like your saying the problem is much more subtle than broken gears or bent shifter forks.The problem is usually the shifter rail and the long keyway that it slides on is bent or distorted some.Usually a new shifter key and a good de-burring of the shifter forks and slider shaft will cure the problem.They will hang up like that if someone has abused the shifter lever.Let us know how you make out with it! dlc

Share this post


Link to post
Share on other sites
Les
What are the symtoms of the actual wheel movement? Is your problem that the wheels won't move in 3rd but work OK in all other gears? Or is it that it only has one gear speed no matter where the shifter is?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    There are no registered users currently online

  • Today's Birthdays

    1. Jcarlton300@gmail.com
      Jcarlton300@gmail.com
      (30 years old)
  • Recent Status Updates

    • dav-1

      dav-1  »  Talntedmrgreen

        Over a year ago, you answered a question I had about the tool bar for my FDT. In your reply dated Dec 31, 2019  you said the spacer, part #16, goes in the bar to allow for up and down depth adjustment. does this mean the bolt has to be tightened at whatever depth desired or does the bolt slide up and down, allowing the lower hitch to free float?
         If it is tightened so the lower hitch and the bar are rigid, then is the depth to be controlled by the shoes? Or by the lift handle?
        Is there any kind of user directions for the tool bar? The Outdoor Power Manual basically shows how to assemble the bar but not how to use it
      · 1 reply
    • tribswede

      tribswede  »  goatfarmer

      ISO a deck for a 6516 H and all the connecting hardware any ideas on where to start?
       
      · 1 reply
  • Adverts

×