maxtorman1234 Posted November 1, 2003 Posted November 1, 2003 I was wondering if the hitch on the front of my 917 is the same as my 712. I need to put the blade on the 712. Thanks
Brent_Baumer Posted November 1, 2003 Posted November 1, 2003 Yep. The length of the lift rod might need to be a little different though.
Les Posted November 1, 2003 Posted November 1, 2003 What I did was to go buy a length(4 foot as I remember) of 5/8" rod, measured it out, then put it in a vise, heated it up with a MAPP torch, then bent the ends over, drills holes for the pins. Don't use 1/2", it will bend. I had to drill out the holes on the tractor and blade too, as I recall
Recommended Posts