Three belt snowthrower belt sizes

[KSever]

I am in need of the belt length for the three belts on this ol 3 belt snowthrower. I have got it all rebuilt and back together but am missing the smallest belt that connects to the engine pulley. Anybody got the length on these thre belts

[Boney]

I have found this diagram http://www.simpletractors.com/parts/snowthrowers/drive.htm I have a listing of a belt for the blower but I have not ordered on yet. Hope this helps. Both of the # are for the same belt #106123 AC # 2025436-3 Also try plugging in # " 990175 " here. http://www.simplicitytechpubs.com/techpubsearch.php

[UCD]

this is from 2002 belt & blade book 990311 36" Snowthrower Middle Drive 121078 Rotor Drive 152017 P.T.O. N/A My 1999 belt & blade book lists the pto belt 990311 36" Snowthrower Middle Drive 121078 Rotor Drive 152017 P.T.O. 106123 length 25.8" type HA

[KSever]

Thanks Boney and UCD, I'm going down today to pick up the belts and a new bearing for the PTO

[Boney]

UCD I have belt # 154273 42.3" for the belt from the center PTO to the 32" mower deck on a 1962 model 725. Can you please check to see if that matches what you have in your book. Just want to check with a reliable source before I go to a dealer and order it....if they have them Thank you :)

[UCD]

My book doesn't list a 725 it only goes back to 1963. Do you have a MFG# for your deck?

[KSever]

Got all the belts and a new bearing for the pto. They couldn't find a belt for the pto so I had to go with a standard lawn and garden belt that's 26". I had started on this last summer then got off track. Already had put new bearings on the auger, cut off and replaced the 1st shaft that is suppose to move up and down to give tension on the belt connected to the blower. Now with new bearings on the pto and new belts this blower is about like new. Thanks again UCD and Boney. Kris