Bill8203 Posted November 3, 2003 Posted November 3, 2003 After many hours of wire brushing, sanding, primer and wet sanding, primer and more sanding I finely finished my mower deck for my B 212. After all of that I didn’t want to use it but I didn’t want to rake leaves either I wanted to share my pictures before I mounted it. :D :) :p
dirtsaver Posted November 3, 2003 Posted November 3, 2003 Bill that is some fine work! Looks factory fresh. Did you rebuild the arbors too or were the bearings and spindles in good shape? Larry
sun41bird Posted November 3, 2003 Posted November 3, 2003 very nice job i just did mine too so i know its alot of work time and money are they shaft collars spacing the rollers?
MDB Posted November 3, 2003 Posted November 3, 2003 That deck looks mighty fine8D^, Great job. BTW I know what you mean about not wanting to get it dirty....;):D
Allis_B12 Posted November 3, 2003 Posted November 3, 2003 If it cuts as good as it looks, your neighbors will be very jealous!:D Very nice job.
Bill8203 Posted November 3, 2003 Author Posted November 3, 2003 Thanks Larry, I rebuilt the arbors with new bearings new center shaft the two outside were in great shape and replaced all of the bolts with stainless steel. quote:Originally posted by dirtsaver Bill that is some fine work! Looks factory fresh. Did you rebuild the arbors too or were the bearings and spindles in good shape? Larry
MPH Posted November 3, 2003 Posted November 3, 2003 Gotta watch making 'em too pretty to use. They won't look good covered with dust sitting around..MPH
DaleC Posted November 3, 2003 Posted November 3, 2003 I worried. I am afraid to make mine look like that. I might frame it and want to hang it over the fireplace!
jkmustang1 Posted November 4, 2003 Posted November 4, 2003 Wow Bill What happened to the food? That thing is so clean you could eat off it. Real nice.
MarkM1958 Posted November 4, 2003 Posted November 4, 2003 WOW,,,Looks like it just came from the autobody shop. Yea, if it were mine it would have dust on it. Nice Job, can't wait for the Tractor...
HubbardRA Posted November 4, 2003 Posted November 4, 2003 Mine looked a lot like that when I finished it a couple of months ago. Amazing what it looks like after mowing the lawn three times with it. Oh well, it is a work tractor.
FrankP Posted November 4, 2003 Posted November 4, 2003 Great Job! Have you given any thought to having the S loop foot guards Chrome Plated? Cheers Frank
Recommended Posts