jkmustang1 Posted November 9, 2003 Posted November 9, 2003 I am still looking for a pto pulley and belt guides for Alice my B110. Dan checked the heaven haul no luck he did find a few things that I do need. Thanks
dirtsaver Posted November 9, 2003 Posted November 9, 2003 John will the PTO from a 2110 or a B series work? If so I may have a spare, although you may need to replace the bearings. Let me know. Larry
fuzy Posted November 9, 2003 Posted November 9, 2003 Which pulley and guides are you looking for? I can see if they are still available.
rokon2813 Posted November 9, 2003 Posted November 9, 2003 fuzy; front pto pulley on landlord or b series, but we all want the Cast Iron ones not the new sheetmetal stamped things.
Kent Posted November 9, 2003 Posted November 9, 2003 You can get a cast-iron pulley of about any size you want at McMaster Carr... They're in the Resources >> Links area....
jkmustang1 Posted November 9, 2003 Author Posted November 9, 2003 I have used Mcmaster-carr before in the stockroom job I did 5 years ago but I don't know the diameter or v depth or pitch. I know the shaft is 1 inch but not sure of keyway size or depth. Also I will still need the belt guide wires that attach to the center bolt just below the shaft. See what I need is in the top picture shown on a b10 but it came from the book I got with the b110. I am trying to put this blower on.
gregc Posted November 9, 2003 Posted November 9, 2003 You can also get some cast iron pulleys here: http://www.phoenix-mfg.com/default.htm
GregB Posted November 10, 2003 Posted November 10, 2003 The belt guides are still available from our sponsoring Simplicity dealers. Just bought two so I can mount a 36" blower on my Big Ten GregB
Recommended Posts