Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
maxtorman1234

Need help with variable

Recommended Posts

maxtorman1234
Hi, I am working on getting the 310 back together, and am having some troulbes with the variable. I cant get the pully back on the bgb shaft so it stays fixed. Does anybody have the measurements of how much the pully on the bgb should move? A picture would be great also, Thanks for any help:)

Share this post


Link to post
Share on other sites
Kent
I'm not sure what you're asking here... The pulley is keyed and bolted onto the shaft. It should be tight on the shaft and the inner sheave shouldn't move at all. The outside sheave will slide in and out slightly on the 3 pins in the hub.

Share this post


Link to post
Share on other sites
maxtorman1234
Thanks, I cannot get the pully to go back on properly for some reason, the sheave does not appear to be long enough and the outer half of the pully on the bgb moves. I have another sheave that I can cut to length, but there is so much wear on the pully that nothing aligns properly. I guess I need a used pully and sheave with matching wear for it to align properly...

Share this post


Link to post
Share on other sites
Kent
I no longer have the variable speed, so I can't measure it. Here's the parts manual for the Landlords. The MFR 990569 should show it: http://www.simplicitytechpubs.com/6767PRINT/PDF_files/TP_400_1319_01_LL_S.pdf

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×