Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Broadmoor snowcab instructions or pictures


mowerman1193

Recommended Posts

I am thinking about trying to build a cab for my Broadmoor 728...I would like to see some pictures of the cab frame and where the mounting points are located... Went though the gallery the other day and found a picture of a 727 cab frame mounted but it was only a side veiw and the picture was not very close/detailed...I have searched the tech site but I can't seem to find anything for the Broadmoor there (maybe I missed it?).. Anyone have any photos or a link to a manual to help me out?? Thanks,
Link to comment
Share on other sites

Here are the two numbers I found for older snow cab 990282 and 990283, go to Simplicitymfg.com hit products then product info then hit the tech publications and enter the numbers. hope this helps
Link to comment
Share on other sites

CAB ENCLOSURE PLANS [url]http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2368085486&category=50377[/url] [url="http://www.simplicitytechpubs.com/techpubsearch.php#start"]Simplicity Technical Publications document search engine[/url] [url="http://www.simplicitytechpubs.com/v_techpubsearch.php"]Simplicity Technical Publications Print Vendor Document Search Engine[/url]
Link to comment
Share on other sites

quote:
Originally posted by Redbarn Rick
Here are the two numbers I found for older snow cab 990282 and 990283, go to Simplicitymfg.com hit products then product info then hit the tech publications and enter the numbers. hope this helps
Thanks but I have this manual that came with my NOS cab I bought for the Landlord...I am trying to find this type of manual for the Broadmoors
Link to comment
Share on other sites

quote:
Originally posted by UCD
CAB ENCLOSURE PLANS [url]http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2368085486&category=50377[/url] [url="http://www.simplicitytechpubs.com/techpubsearch.php#start"]Simplicity Technical Publications document search engine[/url] [url="http://www.simplicitytechpubs.com/v_techpubsearch.php"]Simplicity Technical Publications Print Vendor Document Search Engine[/url]
Thanks Maynard for the Ebay link...I have searched both of the tech sites with no luck on a manual...From what I have found the MFG number for the Broadmoor cabs are 990609...other than that I have come up empty handed... Thanks again
Link to comment
Share on other sites

Bunky,Here is a link to a 727 in the gallery section of simpletractors.. [url]http://www.simpletractors.com/gallery/broadmoor_727.htm[/url] And now that you got me going through the gallery I think I just found what I was looking for right here... [url]http://www.simpletractors.com/gallery/34_years_apart.htm[/url]
Link to comment
Share on other sites

Kevin Helping someone else & helped your self. The info is all here if more people would just take the time to look for it and don't depend on someone else to tell Them. You can learn so much more in the search for the info. There is one word that will answer all of the questions and solve the problems. That word is.
READ
Link to comment
Share on other sites

Mowerman - I have the instruction / assembly book for the Broadmoor cab. I have painted up all the frame rods for mine, but have not assembled it on the tractor yet. Would youlike me to mail you a copy? Tom
Link to comment
Share on other sites

Maynard, You work with this site everyday. It is all so plain to you. For a new member or even myself, I can know it is there but for the life of me not find it. I don't mind folks asking because I guess I need to ask sometimes. This is such a vast site and so full of information. You do a great job. Thanks for your help and we will all read.
Link to comment
Share on other sites

quote:
Originally posted by DaleC
we will all read.
You can speak for yourself on this Dale...If I want to post a message without reading first I will do just that....Thats what the Talking Tractors Forum is about(Helping others and being helped)...If no one ask questions or give replies we would have a dead beat forum....and who would pay $10 per year to read a dead beat forum???There are lots of dead beat forums and yahoo groups that are free... I guess on another note..Who would pay $10 to post messages only so they can get Cocky responces???I don't know if some of my replies was intended to be taken as a cocky reply or not but thats how I took it...
Link to comment
Share on other sites

UCD wrote:
quote:
Kevin Helping someone else & helped your self. The info is all here if more people would just take the time to look for it and don't depend on someone else to tell Them. You can learn so much more in the search for the info. There is one word that will answer all of the questions and solve the problems. That word is. READ
As a responce to this DaleC wrote:
quote:
Maynard, You work with this site everyday. It is all so plain to you. For a new member or even myself, I can know it is there but for the life of me not find it. I don't mind folks asking because I guess I need to ask sometimes. This is such a vast site and so full of information. You do a great job. Thanks for your help and we will all read.
mowerman wrote:
quote:
You can speak for yourself on this Dale...If I want to post a message without reading first I will do just that....Thats what the Talking Tractors Forum is about(Helping others and being helped)...If no one ask questions or give replies we would have a dead beat forum....and who would pay $10 per year to read a dead beat forum???There are lots of dead beat forums and yahoo groups that are free... I guess on another note..Who would pay $10 to post messages only so they can get Cocky responces???I don't know if some of my replies was intended to be taken as a cocky reply or not but thats how I took it...
Kevin, I wrote what I did in an attempt to keep the new guys posting along with some of the old heads. If I offended, Kevin, please accept my apology. This arena is no place to be offensive.
Link to comment
Share on other sites

Dale I only was refering to your post because you said "we all will read" and I meant it as:: you can read if you want but if I want to post without reading first I will do so...You did not offend me... Sorry for the misunderstanding....
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...