Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
wantedinct

Remember that freebe yeoman....

Recommended Posts

gregc
Fantastic job Eric!...and very fast.8D:D Couple of questions for you. Do the rear hubs on your 637 have two holes in each where they pin onto the axle? The ones on my 637 do, and I've not seen this on any other model Simplicity. By using the other set of holes, to pin the hubs on, the trac of the rear tires can be changed. Also, what size battery are you using, and would you post pics of the mounting?

Share this post


Link to post
Share on other sites
tractormike
Nice looking little tractor you have there! Great job! To those who are thinking about doing a restoration on the smaller tractors this should be an example of how good they can look.

Share this post


Link to post
Share on other sites
mowerman1193
Hey that really looks nice...You did a great job.. I think the 728 deck would be too big...The Yeoman only came with a 28" or 32" deck...However some Broadmoors came with a 32" deck but that was mostly the older ones...I belive most all 728's came with a 36" deck and I don't think you have a long enough wheel base to fit the 36" deck under it...

Share this post


Link to post
Share on other sites
Tacey
quote:
Originally posted by tractormike
Nice looking little tractor you have there! Great job! To those who are thinking about doing a restoration on the smaller tractors this should be an example of how good they can look.
True, tractormike. Every SimpletrACtor, from Sovereign to Serf to Wonderboy, came from the factory looking and performing excellent. Very nice job, wantedinct! It's always nice to see 'em all shined up. Tacey

Share this post


Link to post
Share on other sites
UCD
Eric Picture file names can not have symbols in them like ! @ # $ % ^ & * The picture you posted above the one with the [img]http://www.simpletractors.com/club2/attach/wantedinct/motor&batt.jpg[/img] icon is caused by putting symbols like & in the picture file name. The reason for the [img]http://www.simpletractors.com/club2/attach/wantedinct/motor&batt.jpg[/img] icon is that the URL of the picture gets changed as in this example which is the true URL of the picture http://www.simpletractors.com/club2/attach/wantedinct/motor&batt.jpg to this which is a false URL http://www.simpletractors.com/club2/attach/wantedinct/motor%20batt.jpg the & sign can not be read by the club house software, because of security reasons. The & sign gets replaced with %20 as in the last URL example. If you click on the first url above you will see your picture. If you click on the second url above you will see what the program sees. The %20 changes the URL and that URL doesn't exist so you get the resultant [img]http://www.simpletractors.com/club2/attach/wantedinct/motor%20batt.jpg [/img]

Share this post


Link to post
Share on other sites
MikeG
Very nice job on the Yeoman. My 616 looks like your first picture, I've got it all cleaned up and ready to paint. I've got the 8hp allmost ready, hope it will be done by spring. They are really fun little machines. MikeG

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×