Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Simplicity 3210?


maxtorman1234

Recommended Posts

maxtorman1234
Hi, I cannot find pictures of a 3210, Does anybody have any I can look at? And, what do these machines run like? THanks
Link to comment
Share on other sites

They look like: 1. a 2210 with a longer wheelbase and variable speed tranny, 2. a 3012 without the wider front tires, or 3. like an Allis B-210 of a different color or, exactly like this: [img]http://www.simpletractors.com/images/new_in_1970/landlord_small.JPG[/img] http://www.simpletractors.com/simplicity/new_in_1970/landlord.htm
Link to comment
Share on other sites

What's that thing that's sticking out of the hood,just in front of the carb,and under the headlite? Muffler?
Link to comment
Share on other sites

maxtorman1234
Thanks,I was also wondering if this is the same rear end as on my 310V, Do you think I would be able to take the rear and put it on my 310?
Link to comment
Share on other sites

I'm not positive but I think the 300's 400's had a slightly wider stance so the rear is wider. No idea if it would bolt up though. If it does you could always use a deeper dish wheel to get the width back. Hopefully someone else will have a better answer.
Link to comment
Share on other sites

max; the 310 has a longer drive shaft,and from bgb output to tanny is about 4" longer. But that will not be a problem for u to change out the read end, It may work. if you want a 310v without the veriable speed. But just the tanny/rear axel i think are the same. I have a 310 rear end setting in my drive way right now. I have tried to measure the width and the are very close to the same as i can tell.
Link to comment
Share on other sites

Yes I was told that the bgb and the rear end from the 310V and the 3210V are the same. What gives it the wider stance is the wider rims on the 310V. Should be a direct swap for ya. Rob
Link to comment
Share on other sites

maxtorman1234
Thanks alot:D, I still havent been able to contact the dealer with the 3210 for some reason. Guess i'' have to keep trying.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...