Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Engine type


Tragu

Recommended Posts

Hello everyone I have a serf 525 and it seems to be getting a little tired and I would like to replace the engine with the most powerful and cheapest one that will not require alteration ( or a very little bit of them as I am not that gifted with working on engines) I realize there are alot of choices out there and any info would be great. It is at this time a 5 horse pull start and it dosent matter to me if I stay with a pull that would be ok. thanx in advance Doug
Link to comment
Share on other sites

go to your local brigs and straton dealer bring your model type and code a shoort block for your engine (if Avable) should run you about 200-300 dollars A short block is a new cylinder crank cam and valve all installed just switch over the flywheel ignition system head carb muffler and crank breather most gaskits are included along with some instruction for a novice with some experince it should take the better part of a morring to unbolt from the tractor and complte this renewing project.
Link to comment
Share on other sites

I agree, this seems to be the way to go. This would be the only way that you can replace the motor and not have to drill any holes.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...