Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Want to convert to a hydro lift


orangeone

Recommended Posts

I have a 7112H and it has a manual lift. I would like to convert it to a hydro lift because of my back problems. Can this be done by adding a lift cyl and removig the manual lift?Any help would great. By the way , this IS the Greatest site out there. I don't post very much but I read it at least twice a day.
Link to comment
Share on other sites

Ronald Hribar
I've been told the Sunstrand has that capability. And for that reason I would like to get a 7116. Until that time I will experiment with actuators to do the same thing.
Link to comment
Share on other sites

To convert a manual lift 7112H to a hydro lift. You would need a Hydraulic cylinder and control valve,Hydraulic hoses[rubber and steel].You can run the lines off the Sunstrand pump. The manual lift handle would have to be removed,two bolts. You would have to make a bracket for the end of the Hydraulic cylinder. I have a Simplicity 7116H,Allis Chalmers 919H,Deutz-Allis 916H,all with factory hydro lift. I could take some pictures of the hydro lift if you want? [url]www.simplicityva.com[/url] Karl
Link to comment
Share on other sites

Karl, I would like that. All I really need is the cyl. I have a small valve body off of a Wheelhorse. If someone has a cyl to sell I would be intrested in buying it.
Link to comment
Share on other sites

Was too busy on Jan 12 2004,having fun in the snow with Allis Chalmers 919H with 42" snow blower.:D}:) Here are the pictures of a hydro lift on my Deutz-Allis 916H. For hydro lift you might have to change the implement relief valve spring. [img]http://www.simpletractors.com/club2/attach/karl_brandt/deutz-allis-1.jpg[/img] Pump and lines. [img]http://www.simpletractors.com/club2/attach/karl_brandt/deutz-allis2.jpg[/img] [img]http://www.simpletractors.com/club2/attach/karl_brandt/deutz-allis3.jpg[/img] Hydraulic control valve under tractor frame. [img]http://www.simpletractors.com/club2/attach/karl_brandt/deutz-allis4.gif[/img] End of hydraulic cylinder and bracket for cylinder. [img]http://www.simpletractors.com/club2/attach/karl_brandt/deutz-allis6.jpg[/img] Control valve. [img]http://www.simpletractors.com/club2/attach/karl_brandt/deutz-allis7.jpg[/img] Other end of hydraulic cylinder. Karl
Link to comment
Share on other sites

Karl, THANK YOU so much for the pictuers. All I need now is to find a cyl,and maybe the lines . I might post an add in the classifieds for one. Thanks again. Got my $10.00 back already.
Link to comment
Share on other sites

  • 4 weeks later...
Rodger, There's a 7117H hydro lift on ebay right now. That would be the simplist. UCD and the rest say hydro lift hydro has different valves, I know parts numbers are different.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...