Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
kdhehr

AC 616

Recommended Posts

StanD
Kenny: All components are located behind flywheel. System has rectifier/regulator combo. Engine has to be removed as well as flywheel. Ohm meter readings from each stator lead should be .11 to .19 to ground. AC voltage with rectifier/regulator disconected should be 28 to 65 volts at full rpm. Only way to check ac voltage would be to run engine with jumpers attached to stator terminals with rectifier/regulator onhooked. Just had a CCKB with bad stator but they can be checked on outside terminals. Had engine running lagged to two 6X6's while making the tests. StanD

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×