Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

7100 or 7100 series rear lift


ambler

Recommended Posts

Can someone post a picture of a properly installed rear lift on the hydro. My cable is rubbing the hydro control. The install guide shows putting in a belt guide but not where the cable is. A picture would help. Thanks.
Link to comment
Share on other sites

Thanks Maynard, The question is once the belt stop is installed where does the cable run relative to the belt stop? The six speed picture shows the cable position. On top of the belt stop, behind it?
Link to comment
Share on other sites

Ambler, what the note hes refering to says is "If you have a vickers Hydro it doesnt use that cable kit"
Link to comment
Share on other sites

On a hydrostatic the stop is install according to step 10 fig 5. The leg of the stop is over the top of the cable.The cable is to the right of the stop. On the six speed and automatic it is to the right of the stop leg under the arm.
Link to comment
Share on other sites

Maynard I see what the proble is I need to center the rear lift so the cable clears the hydro control.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...