Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Finding parts for a B&S 23D (landlord 101)


Guest

Recommended Posts

I'm trying to find the screws, set screw/nut, and points cover for a 101 Landlord. I know the points/condensor should still be available for this motor, but the other parts probably are not available new. Any one have any leads on these types of parts. I did post a wanted advertisement on this site. Any suggestions would be great! Thanks. Note: This is what I'm left with... [img]http://www.simpletractors.com/club2//attach/michaelg221/PICT0018_crop.JPG[/img]
Link to comment
Share on other sites

All of what you need is still available new. Just got a new points cover last week, as a matter of fact. I use standard machine screws. The screws to attach the points are 10-24, 3/8" long. The screws to hold the points cover on are 8-32, 1 1/4" long. You'll also need lock washers for both. In additions to what you have listed, you will need the plunger seal and retainer. Here are the part numbers for everything that is missing: 68768 - Plunger seal - $3.15 93516 - seal retainer - $1.10 221873 - seal retainer - $2.55 690295 - screw (need 2, lockwashers are attached to screw) - $2.05 each 692913 - points cover gasket - $1.40 690277 - lock washer, points cover screw (need 2) - $1.10 each 692836 - screw, points cover (need 2) - $1.10 each 211327 - points cover - $8.72 298060 - condenser - $6.15 298185 - points - $19.70 66895 - insulator - $1.15 90200 - screw - $1.15 691077 - lockwasher (need 2) - $1.10 691612 - nut - $1.45 The last four items are the little insulator board that mounts on the top screw of the points cover. Your points wire and ignition armature wire attach to the rear of the insulator, and your ignition switch wire to the front, and the screw, washers, and nut to attach the wires. The prices for the points, condenser, screws and lockwashers are from the book. The rest is what I was just charged, just last week. Pat
Link to comment
Share on other sites

Fantastic. I'll print this up and fax this to my Simplicity dealer, unless you suggest a better way to get this. THANK YOU!!!
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...