Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Tilled Garden


beuce

Recommended Posts

Well with many thanks to all that helped with my tiller drive pulley questions and to Bunky for selling me the tiller last fall, I was able to get the garden tilled this weekend. All the work I did on the tiller and the tractor sure paid off. It was such a joy watching the tractor work. The weld-a-hub pulleys and belt release brackets I made from drawings posted here worked great. The only issues I had were the belt lengths which by the way I used a 44" from the 5 1/2" tiller drive to tiller, and a 63" from the 10" tiller drive to the 3" on the tractor, a lot of trial and error there. I thought OEM lengths were 42 and 56 but I may have looked at the wrong chart. Thanks again to everyone who gave input. Brian
Link to comment
Share on other sites

thedaddycat
The variable and hydro frames are 4" longer than gear tractors, perhaps that would explain the difference in belt length for BGB to PTO?
Link to comment
Share on other sites

Glad to here you made it work.... I'm getting ready to put mine on my B112 now... those belt length's might help me...
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...