Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Tiller on B112????


Bunky

Recommended Posts

I have a 32in Tiller that was on a 2010 I sold to mowerman Doesn't seem to draw any interest on the Classifieds so I think I will use it on my B112 does anyone know how much longer the engagement rod is and Belt info????
Link to comment
Share on other sites

The wheel base is 4 inches longer, so I would think the rod would need to be 4 inches longer also
Link to comment
Share on other sites

I put a 32" tiller on my B-210, and like Marty says, 4" longer. Also remember that the belt from the PTO to the clutch pulley has to be 8" longer. Pat
Link to comment
Share on other sites

Right I got it on but i can't remember how the belt and clutch rod goes.. Does someone have a Diagram??????? And do you have to take off the pto pulley for the mower?? Mine might be on Backwards...
Link to comment
Share on other sites

You don't have to remove the drive pulley for the center PTO. That pulley should have the hub toward the gearbox. Here are diagrams of the clutch rod and belts: http://www.simpletractors.com/operation/tiller1/page_2.htm Pat
Link to comment
Share on other sites

quote:
Originally posted by PatRarick
You don't have to remove the drive pulley for the center PTO. That pulley should have the hub toward the gearbox. Here are diagrams of the clutch rod and belts: http://www.simpletractors.com/operation/tiller1/page_2.htm Pat
And here: http://www.simpletractors.com/club2/topic.asp?TOPIC_ID=29248
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...