Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
Leroy

Is a Sickle bar attachment difficult to ship?

Recommended Posts

SmilinSam
Its not all that bad if you remove the cutter bar assembly from the hitch/drive assembly and ship in two boxes. I take the pitman arm loose at the cutters, then pull the 4 bolts (or something like that) from the area above the big skid at the drive end of the cutterbar. Then the complete cutter bar assembly comes away. ....if ya'll are following what I'm sayin that is:D

Share this post


Link to post
Share on other sites
Guest
I've got a B112 and a matching sickle bar; will that same setup work on a B10? Is the tractor length different from the mid-PTO to the front mounts? Is it as simple as a different belt?

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×