Kent Posted May 22, 2000 Share Posted May 22, 2000 For those who are having problems with the hydrostatic tractors creeping in neutral, I discovered the following on my 7012H: The trunion lever spring (#29 in picture) was weak, causing the trunion lever assembly (#30 & #33)to "jiggle" in the shaft assembly (#18). The problem was not noticeable unless the engine was running (vibrating). Replacement of the spring corrected the situation somewhat on my tractor, it may worth a try on yours (Don't forget to readjust all linkage after the spring is replaced). There is still an internal hydro unit problem on my tractor that I'm working on trying to find a fix. http://home.att.net/~achs/trunsprg.jpg Link to comment Share on other sites More sharing options...
Les Posted May 24, 2000 Share Posted May 24, 2000 Dutch, Thanx for the update..I'll take a look at the spring on my 7117.... Let me know if you have any luck on the internal tilt plate problem. Link to comment Share on other sites More sharing options...
Recommended Posts