Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  
Boney

Impliment pins what do you use and where do you ge

Recommended Posts

Boney
The impliment pins that you use to attach your attachements to your tractor, what do you use and where do you get them ? I did a search under" impliment pin" and was not able to find much. Thnx Herm

Share this post


Link to post
Share on other sites
Roy
Factory clevis pins are nice but I have been known to cut a bolt to length and drill a hole in it for the clip when necessary. The pin for the tiller on my B-1 is a long carriage bolt I cut to length and drilled. I also use cotter pins for clips sometimes.

Share this post


Link to post
Share on other sites
lsenus
The Depot has pins that look like a large "D" when locked. I use then on the snow blower, mower deck, etc. They're nice because the retaining clip is part of the main pin itself. Cost - around $.90 each. Usually found in the hardware aisle in the rack of drawers.

Share this post


Link to post
Share on other sites
JR
Yeah, I think those "D" type pins are the best. You don't have to worry about the clip working loose and falling out of the pin, and then losing the pin! Our local Rural King carries these, as well as the regular hitch pins and clips in various sizes. I recently got some of the "D" type pins and used them on my deck adjusters on my DA Vanguard's 42" deck, to replace the 1/4" bolts that a DPO had used.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • Brian Shires
    • tripleguy
  • Today's Birthdays

    No users celebrating today
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 8 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×