Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Sign in to follow this  

Correct colors

Recommended Posts

Andy, This has been a tough subject. Try searching the forum and the archives, perhaps someone will reply to this with their best information on top of what I will help with next. So far, I've bought the cheep $3 cans of paint from Walmart Dupicolor Chevy Orange-Red Engine paint. I've painted a tiller, some small parts to my 3112H and a mower deck. Now this particular paint looks close to the Omnibrand red I was referred to (made by PGP), but I didn't really do any fine painting and really compared it close. At first glance you can't tell the difference. Now the tough thing is, I think your 725 and the 63 Landlords are a slight color difference (enough to notice) and I think the newer Simplicities are different too. So this is about all I can tell you with my minor first hand experience. I am going to keep painting orange decks and implements with this paint, because I really don't care how close the implements are to original, as long as they work and don't rot. As for getting your right color, I'm punting to the more experienced members of this club. Hope this somewhat helps. (I should add, welcome new comer. These old machines are neat eh?)

Share this post

Link to post
Share on other sites
I have a 61 Wards (725). From the look of the paint under the hood, they were more red than orange. Much redder than the Allis Chalmers or Chevy Engine Orange. Mine is not original, since it is now painted black and maroon.

Share this post

Link to post
Share on other sites
The Walmart Dupicolor has two chevy engine paints. One is Chevy Orange and one is Chevy Orange-Red, the "Orange-Red" looks very close to the 3012 and 3112H series tractors. The complaint I remember hearing was that it faded quickly (poor paint). I was also told that Omnibrand was the cheaper paint. andyketch, one thing you should mention is if you are a "purist" (this is not a religion thing :) wanting to restore as close to original or if you just want to make a good looking machine (i.e. you really don't care too much.) I am in the middle on those two. I'd like to at least get close, but I'm not going to over do it.

Share this post

Link to post
Share on other sites
This topic is now closed to further replies.
Sign in to follow this  

  • Who's Online (See full list)

    • 720nut
    • Jac
  • Today's Birthdays

    1. littlefan
      (60 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts