Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

midpw

Landlord 101

Recommended Posts

midpw
Good Morning folks......I need some help I've gotten a hold of a Landlord 101 with a front blade, mower, tiller and snowblower. A good find I think. BUT...The tractor has an odd sort of differential on the right rear axle casting that is cracked and damaged. I've taken it off and I'm wondering if it wouldn't be smarter to try (ask you guys) if I should just look for an entire rear end and gear box for this thing. Any thoughts, ideas or better yet maybe you've got an assembly that I need. Thanks in advance, Bruce

Share this post


Link to post
Share on other sites
ReedS
Welcome to the club! The allis/simp. diff is mounted on the right side of the axle tube(as you describe). There are several different failures that can occur with this diff. I'm not sure by your statement which piece you are refering to as cracked and damaged. Is it the diff carrier,the axle tube or the hub assembly? (hint, a picture here is worth more than a 1000 words) Another idea for you is to look up the service manual for your tractor at the simplicity techpubs site. With the service manual you can get a complete parts breakdown which would aid in identifing the parts that you may need. I'm also sure that if you really want to find a complete transaxle assembly a wanted ad in the classifieds would help.

Share this post


Link to post
Share on other sites
midpw
OK.....I didn't give enough information. It's the cast axle tube that is cracked, actually it seems to be 'torn' open and will not support the axle shaft. I've taken the hub and the differential assembly off and was hoping to find a clip to slide the casting out of the main case. Am I missing something or do I have to split the case and work from the inside?

Share this post


Link to post
Share on other sites
midpw
OK......you guys have been a great help. Looks like I'm going into the gearcase next! I'm not gonna restore this thing to showroom.....that's not my style, but because of all the attachments that came with it I do intend to use this tractor. Right now I'm mowing with a Gravely from the early 80's and I'm also working on another Gravely from the early 70's. Both Gravelys have a mower deck but thats all. Thanks again for your help and advice.

Share this post


Link to post
Share on other sites
TomMaryland
Welcome mid to the best place on the net! Sounds like the guys have you going. It you were closer, id try to sell you a gravely 432 commercial thats taking up space i need :)

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Who's Online (See full list)

    • jdoub
    • spi
    • rich_kildow
    • Md1227
    • Skelsey1989
    • PhanDad
    • MARK (LI)
    • NandoG
    • WKostiwa
  • Today's Birthdays

    1. ronb212
      ronb212
      (54 years old)
  • Recent Status Updates

    • Paul M.Murphy

      Paul M.Murphy

      Hello glad I got on this site. I hope to upload a couple of photos of my Simplicity Broadmoor 
      Model 707 Tractor. I have replaced all the belts on it and installed a new ignition switch.
      Have a mower deck which was in poor shape , repaced a couple of bushings and welded the
      deck where there was some holes. The tractor and mower deck came from a friend and the 
      mower deck metal was getting pretty thin. Some new metal was put in it and we also undercoated the underside of the deck. This was done by my friend Greg Toulman.
      I have not put the mower deck on the tractor yet, waiting for Greg to come home and give me a hand. Can you please tell me if there is a manual for the mower deck and where I could get one.
      I would also like to get some moon wheel discs as well.
      I will try and down load some photos of the tractor when my wife shows me how to. 
      I really love driving this tractor and also how well it is made compare today's tractors, especially the flexible rear end and the rollers.
      Tell the next time 
      Paul
       
      · 9 replies
    • jbrooks

      jbrooks  »  Talntedmrgreen

      Josh
       
      folowing  this from a link at the downloads.  I just rescued an AC 920 with the lambodini diesel. I can' t download  yet .  Where did you find the PDF copy you posted. . I would like to figure out how to adjust the injection pump. 
      I assume it's a bosche, correct
      · 0 replies
  • Adverts

×