Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

  • Announcements

    • Kent

      Sign In or Password Problems?   10/09/2016

      If you can't Sign In, you need to reset your password.  Use the Forgot Your Password link at the bottom of the Sign In screen, and the site will send you an email to reset it. If you have an AOL email account, use the Contact Us link at the bottom of the screen -- AOL is intermittently blocking email from the site.
    • Kent

      Feedback Please!   10/28/2017

      See News and Announcements forum.
Sign in to follow this  
Ryan

Newer upper lift and older hitch adapter

Recommended Posts

Guest
Ryan, you did a great job on the old style sleeve hitch. Thank you again for the dimensions and confirming the sizing I was seeing. Note: I've since bought a mold plow for the old style hitch and I have everything but the rod for the old hitch. I through in a 4' x 1" steel bar (think it was a weight lifting bar) and a clamp; unless the distance of the chain going to the mold plow is correctly placed, you can't lift the plow.

Share this post


Link to post
Share on other sites
Ryan
Thank you, you are more than welcome. My rod is 8 3/4" long with 3/8" holes drilled in it 7/8" from the end to the center of the hole on each end. The holes are 90 degrees apart from each other.

Share this post


Link to post
Share on other sites
Roy
Ryan, I would love to have the dimensions/drawings for both parts. I have ACAD LT 2000i. Can it read your 3D drawings? Let me know if you can send me the files and I'll PM you my e-mail address. Thanks,

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×