Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Newer upper lift and older hitch adapter


Ryan

Recommended Posts

Ryan, you did a great job on the old style sleeve hitch. Thank you again for the dimensions and confirming the sizing I was seeing. Note: I've since bought a mold plow for the old style hitch and I have everything but the rod for the old hitch. I through in a 4' x 1" steel bar (think it was a weight lifting bar) and a clamp; unless the distance of the chain going to the mold plow is correctly placed, you can't lift the plow.
Link to comment
Share on other sites

Thank you, you are more than welcome. My rod is 8 3/4" long with 3/8" holes drilled in it 7/8" from the end to the center of the hole on each end. The holes are 90 degrees apart from each other.
Link to comment
Share on other sites

Ryan, I would love to have the dimensions/drawings for both parts. I have ACAD LT 2000i. Can it read your 3D drawings? Let me know if you can send me the files and I'll PM you my e-mail address. Thanks,
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...