Jump to content

Unofficial Home of Old Simplicity & Allis-Chalmers Garden Tractors

Is this a carb shield when running a snowblower?


Guest

Recommended Posts

Is this a carb shield when running a snowblower? (Would you still believe I'm going through boxes from the Mother Load?)

Link to comment
Share on other sites

Mike I could use that for my B110. I am outfitting my tractor for a 36" M-W single belt blower. I have a AC belt cover. Members hooked me up with the pto pulley and the control rod bracket and knob and a muffler. The tractor was originaly sold with a blower but it was gone. Got a Ac book for one and tire chains with it though. Also found wheights on ebay for the rear tires and lift. That part and lights would have me pretty well set. Tough to find.
Link to comment
Share on other sites

Thanks for confirming this. I am not sure how this mounts. This has a crease like it should be bent. I'm just gonna put this on a shelf for now.
Link to comment
Share on other sites

Should mount something like this one. I got these Cad plans from MadMike last winter to make this shield and it turned out great. Looks to be just like original. [img]http://www.simpletractors.com/club2/attach/KSever/Dsc00068.jpg[/img] [img]http://www.simpletractors.com/club2/attach/KSever/Dsc00071.jpg[/img]
Link to comment
Share on other sites

The top part of the sheild in your picture should be bent down, at the crease it should be bent to a 90 degree angle.
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...